Proven performance and reliability of
ElectroMech cranes in precast yards
across the world make us a preferred
solutions provider in this industry
Precast India Infrastructures Pvt. Ltd. is a joint initiative between one of Pune’s most reputed civil contractors, Bhate Raje Construction Company Pvt. Ltd. and leading real estate developers, Panchshil Developers. PIIPL was founded in 2010 with a mammoth production facility in Wade Bolhai, on the outskirts of Pune. Spread over 63 acres, this state-of-the-art precast factory is one of the largest in India. Full scale production started here in 2012.
PIIPL undertakes high volume contracts for IT buildings, commercial complexes, industrial and residential buildings. They offer a one-stop ‘design and build’ solution and have successfully completed several projects with a cumulative built-up area close to 4 million sq.ft.
For their new plant, PIIPL was looking for suitable solutions to meet various handling requirements in the plant. The applications included handling moulds and precast segments in the outdoor area and handling smaller moulds and precast columns inside the factory.
The essential criteria for selection were the performance and reliability of cranes, time-bound completion of the project and capability to offer swift and efficient service support. Excellent support on the previous projects corroborated PIIPL's trust in ElectroMech while expanding the production capacity.
ElectroMech suggested three double girder gantry cranes to work in different bays in the outdoor casting yard, where large and heavy castings are manufactured. These cranes are fitted with Abus hoists which demonstrate peak performance in extreme working conditions and require minimal maintenance. One 8t single girder crane was recommended for the indoor application where smaller moulds and precast columns are to be handled.
Transporting and installing these cranes in a remote and hilly location, that too in a short time span, was also a big challenge. Team ElectroMech, with its large manufacturing plant and vast experience of working on various difficult sites across the world, was able to manufacture and install the cranes in just 12 weeks, which was well before the stipulated time.
We have installed several ElectroMech gantry and EOT cranes at our facility for manufacturing precast elements. Our handling requirement is very unique in the precast industry in India where elements weighing 40t are to be lifted up to 24m.
In spite of several other options, we were impressed with the good assistance and best solution offered by ElectroMech. Gantry cranes offered to us can lift as well as stack heavy elements in one cycle, which avoids duplication of handling and efforts. It is an advantage as the gantry cranes are equipped with double hooks and parallel hoisting arrangements.
I would like to mention that Mr. Tushar Mehendale and his expert team are providing us with great support and engineering solutions tailored as per our specific requirements. We involve ElectroMech right from the project planning stage and receive good cooperation. I would say, though we have a few more cranes of other makes, ElectroMech is one of the best.
- Mr. Ajit Bhate, Managing Director,
© Copyright 2020 | All the names and logos used here are the registered trademarks of respective companies. For private circulation only. Certain data mentioned here is based on assumptions and theoretical calculations, hence may not be accurate in practice and can’t be considered as a claim by the company.